|
246
|
20W Diode laser system at 808 nm
|
Opto-Power
|
OPC-A015-808-FCPS
|
2 years, used 50h
|
Excellent |
|
|
Specifications: The system is standalone. It includes the power supply, control unit and output fibers. The output consists of one fiber bundle of 4 m long, which separates in four fibers of 1 m each. Each of the four fibers are terminated with a SMA connector. Each of the four fibers delivers 5W at 808 nm (the system is rated 20W). The wavelength and power are stabilized.
The system was purchased in 1999, but was used only 50 hours because the project was cancelled. The system is rated 10'000 hours.
|
|
933
|
Alignment Cube
|
COC
|
AC
|
|
Very Good |
|
|
Specifications: Master 90 degrees Reference. Five, full aperture faces. Adjustable base, 80 T.P.I screws. One arc-second accuracy. 1.5 inch cube. Used to establish precision right angles and multiple orthogonal lines-of-sight in lab or field. The five surfaces, flat to 0.05 wave, are aluminized and protective overcoated.
|
|
1197
|
Degreaser
|
Baron Blakeslee
|
MSR-120
|
|
Good |
|
|
Specifications: Ultrasonic immersion model, 115V, 1ph, refrigerated 1/2 HP model, 2 inside sumps - 10" x 12" x 10", has liftoff cover, OD 32" x 33" 41" LWH. Refrigerated water separator, manual spray wand/foot pedal switch, 475 lbs. Operating manual.
|
|
1143
|
Degreaser
|
Baron Blakeslee
|
MLR 120
|
unkn
|
Good |
|
|
Specifications: Heated vapor degreaser, ID 21" x 24", 2 bays 12" x 10.5".
|
|
1076
|
Delta F PLATINUM SERIES OXYGEN ANALYZER
|
Delta F
|
#FAH0500
|
7
|
Excellent |
|
|
Specifications: Delta F PLATINUM SERIES OXYGEN ANALYZER #FAH0500
These are new open box, all paper work included. Certificate of compliance.
Factory can upgrade these units to the model FAH0050, with 3 ppb detect, +/- 25 ppb accuracy. Contact Delta F to confirm and for pricing.
|
|
882
|
Diamond Wheels & Adapter
|
Norton Abrasives
|
|
|
Excellent |
|
|
Specifications: Diamond wheels for #18 Blanchard. 2AT 18 x 7/8 x 16 1/2 ME 73188 SD220-R75B99E and SD100-R50B99E. Two new unused wheels still in box. One wheel mounted on adapter. Three total wheels plus adapter.
|
|
1191
|
Flow Hood
|
|
|
|
Good |
|
|
Specifications: Dimensions 8' 2" long x 2' 11 1/2" wide x 5' 8" tall. Hepas replaced last year. Two available.
|
|
642
|
Laser
|
Melles Griot
|
|
2001
|
Excellent |
|
|
Specifications: 488nm 50mW CW Argon Ion laser. Laser head: Model 543R-BS-A01, Manufactured in 09/01, Refurbished 5/23/02 with new tube. Power Supply: Model 176B-208B. Air Cooled. Unused.
|
|
877
|
Laser Beam Expander
|
SORL
|
COAR 20X05
|
1990
|
|
|
|
Specifications: Laser beam expander with a 4" diameter off axis parabolic primary mirror. Secondary mirror is 1" diameter. Manufacturer specs for the 20 x 05 model are: Input diameter: 5mm, Output diameter: 100mm.
|
|
1169
|
Laser Diode Module
|
Laser Diode
|
CA-3-4-650A
|
NEW
|
Excellent |
|
|
Specifications: 10.5 mm diameter Brass, 22 mm long, 650 nm, 4 mW, Class IIIa. Operates at 3 volts DC, with 6" leads, terminated with 0.1" header type connector. Includes APC circuit, and plastic collimator lens. Sold in lots of 1000. Intended for OEM customers. Buyer assumes all responsibility and agrees to comply with all Government regulations, including the FDA's CDRH requirements for certified laser products.
|
|
1021
|
Manual
|
AIT Industries
|
360 and 360A
|
1988
|
good |
|
|
Specifications: Operation and maintenance Instructions for the Mark IV Deluxe Bevel Edgers. Installation, Operation, Maintenance, Troubleshooting, Repair. Includes drawings and part numbers
|
|
810
|
Manual
|
Strasbaugh
|
6DA-DC
|
2000/2001
|
Excellent |
|
|
Specifications: Operations and Maintenance Manual for the 6DA-DC Precision Polishmaster. Complete with Installation, Safety, Operator functiions, Machine Setup, Preventive Maintenance Schedules, Maintenance Adjustments, Assembly Drawings, Parts List, etc.
|
|
857
|
Mirror
|
Nikon
|
Plane
|
|
Very Good |
|
|
Specifications: Plane Mirror in Very Good Condition.
|
|
859
|
Mirror
|
Nikon
|
Polygon
|
|
Excellent |
|
|
Specifications: Polygon mirror with 8 divisions 45 degrees apart.
|
|
69
|
Pellicle Beam Splitter
|
Coated
|
New
|
|
Excellent |
|
|
Specifications: 2" Pellicle Beam Splitters Coated 40% reflection and 40% transmission in the visable.
|
|
67
|
Pellicle Beam Splitter
|
Coated
|
New
|
|
Excellent |
|
|
Specifications: 1" Pellicle Beam Splitters Coated 40% reflection and 40% transmission in the visable.
|
|
68
|
Pellicle Beam Splitter
|
Uncoated
|
New
|
|
Excellent |
|
|
Specifications: 2" Pellicle Beam Splitters 10% reflection and 90% transmission in the visable.
|
|
66
|
Pellicle Beam Splitter
|
Uncoated
|
New
|
|
Excellent |
|
|
Specifications: 1" Pellicle Beam Splitters 10% reflection and 90% transmission in the visable.
|
|
936
|
Plane Parallel Mirror
|
Davidson
|
D-616
|
|
Very Good |
|
|
Specifications: In adjustable mount with case, parallel to better than 1 sec.
|
|
938
|
Polygon 8 sided
|
Starrett Webber Gage
|
|
|
Very Good |
|
|
Specifications: For checking & calibrating angles. Grade 2, Solid Cboblox (Chrome-Carbide), in wood case.
|
|
858
|
Prism
|
Nikon
|
Pentagon
|
|
Excellent |
|
|
Specifications: Pentagon Prism. Aprox 4" diameter overall. The faces have an aperture that is approx 1.5" wide and 3/4" high. Angles are marked in 45 degree increments below each aperture. No certs although still shown on Nikon website.
|
|
732
|
Rotary Table
|
|
|
|
Good |
|
|
Specifications:
|
|
1129
|
Sonic Mill
|
the Bell Group
|
Autopac II B
|
Unknown
|
Very Good |
|
|
Specifications: Stationary Sonic Mill. Branson generator 900BCA.
|
|
997
|
Spindle
|
GMN LOH
|
TS 35
|
|
Good |
|
|
Specifications: As pictured and marked: #12. du x 150 R255511
|
|
884
|
Spindle
|
LOH
|
WG
|
|
Very Good |
|
|
Specifications: Marked: TS 42x200 GMN TEMPO LOH WETZLER
|
|
995
|
Spindle
|
LOH
|
ZS 42 x 100
|
|
Fair |
|
|
Specifications: As pictured and marked: #8. du 5. Doesn't spin but owner thinks it can be freed up.
|
|
998
|
Spindle
|
LOH
|
UNKN
|
|
Good |
|
|
Specifications: As pictured and marked: # 13. Model number is worn off.
|
|
996
|
Spindles
|
LOH
|
ZS 35
|
|
Good Fair |
|
|
Specifications: As pictured and marked: #9. du x 150 103, #10. du x 150 101 (keyway has a chip in it seen in photo). #11. x 150 du 13.
|
|
993
|
Spindles
|
LOH
|
ZS 42 x 100
|
|
Good |
|
|
Specifications: As pictured and marked: #1. du 075, #2. du 4, #3. du 076, #4. du 2, #5. du 3.
|
|
927
|
Sputtering Power Supply
|
ENI
|
DCG-200 Slave
|
7 years
|
Excellent |
|
|
Specifications: 20KW slave sputtering supply to add another 20 kilowatts of power to a DCG-200 master. Model # DC228-A022000 10
|
|
314
|
Substrate Centering System
|
FAS Technologies
|
|
3 Years
|
Excellent |
|
|
Specifications: System is Brand New, never used. Designed to receive & center standard 600 x 600 mm substrates (held by 6 vacuum chucks)& prepare them to be automatically loaded into a process tool. Receiver mechanism & a control box. Receiving mechanism centers by use of two centering arms w/fingers, located diagonally at opposite corners & six substrate pads, which raise & lower the substrate into position. Self contained. Cables and manuals included. Dims: 41"x32"X 54" tall.
|
|
1074
|
SVG/ASML Beam Delivery Tube
|
SVG/ASML
|
Beam Delivery Tube
|
|
Excellent |
|
|
Specifications: New in the original shipping crate beam delivery tube for SVG/ASML equipment, we cut the plastic open to have a look.
We have 2 of these that appear to be new in original shipping
crate, we're unable to find a part number at this time.
|
|
1075
|
SVG/ASML Laser condenser unit
|
SVG/ASML
|
SVG/ASML #921-0034-001
|
|
Excellent |
|
|
Specifications: Laser condenser unit, SVG/ASML #921-0034-001
|
|
1180
|
Temescal Ebeam power supply , controller and sweep
|
Airco Temescal
|
CV-8
|
1990's
|
Excellent |
|
|
Specifications: Controller and Power Supply Unit: S/N 8-31974 P/N 0605-7640-0 M/N CV-8-111A Year 1983 (Latest Revision). CV-8 came off a working system.
|
|
1145
|
Temperature Humidity Chamber
|
Thermotron
|
SM-8C
|
Unkn
|
Good |
|
|
Specifications: Temp Range -110F to + 350F (-73.3C to +177C), Humidity Range 20% to 95%. 24"x24"x24", Watlow F4 and 94 series controllers, Chart Recorder.
|
|
1200
|
Window
|
|
|
|
Excellent |
|
|
Specifications: Fused Quartz, 11.5" diameter x 1.75" thick. Flat to 20th wave on one side.
|
|
1073
|
Zygo Laser Head - SVG/ASML #923-0071-003-01
|
Zygo
|
SVG/ASML #923-0071-003-01
|
|
Very Good |
|
|
Specifications: Qty 2, SVG/ASML OEM Zygo Laser Head, Pulled from like new equipment. SVG/ASML #923-0071-003-01
|
|
1072
|
Zygo Laser Head 3mm #SER1207
|
Zygo
|
7702T S/N 00-26-S009
|
7
|
Very Good |
|
|
Specifications: Like new Zygo Laser Head, pulled from like new SVG/ASML equipment.
|
|
1070
|
ZYGO MODEL 7712 LASER HEAD
|
Zygo
|
P/N 8070-0159-04
|
|
Excellent |
|
|
Specifications: NEW-OPEN BOX ZYGO MODEL 7712 LASER HEAD P/N 8070-0159-04
|
|
1071
|
ZYGO ZMI 2002 DUAL AXIS MEASUREMENT BOARD 6U VME
|
ZYGO
|
ZYGO ZMI 2002
|
|
Excellent |
|
|
Specifications: Like new opened for inspection and probably incoming test.
|
|
