|
1190
|
Autocollimator
|
Nikon
|
6D
|
|
Very Good |
|
|
Specifications: Apparent low use. Includes transformer, lamp house, bulb cord, booklet, wood case.
|
|
1198
|
Centering Machine
|
LOH
|
LZ80S
|
|
Good |
|
|
Specifications: Working range 10- 90mm, Automatic work piece feed by pre-orientated lifting out of a magazine tray. Recent use.
|
|
1196
|
Centering Machine
|
LOH
|
WG
|
|
Good |
|
|
Specifications: Bell clamp method, Working range 6-150 mm. Includes pump, right and left side spindles and mounting arbor. Fully operational.
|
|
1119
|
Centerless Grinder
|
Royal Master
|
TG-12x4
|
7 years
|
Excellent |
|
|
Specifications: Wheel dressing components; Infeed grinding components; wheels and wheel mounts; multi-blade cut-off wheel; 4" auto loading system for 4" rods. Original total $82K.
|
|
1155
|
Coating machine
|
CHA
|
SE1000
|
Refurbished
|
Very Good |
|
|
Specifications: 24x40 SS Belljar, DP 10 diffusion pump, Leybold Hereas mechanical pump. 4 pocket E-gun (rebuilt by EB sources), CV-8 Power supply with manual, Planetary system w/4 planets with maximum capacity of 8" dia each (all new bearings & o-rings). Glow discharge, 4 thermal-evaporation sources controlled by two SCR power controllers, each controller controls two sources w/selectors. Heater 2KW total control w/variable transformer. Extra Leybold Hereas mech pump and an IC6000 Crystal Monitor Deposition Controller (unkn condition, uninstalled) . Sycon TM-100 thickness monitor. 5 ton Chiler with new compressor. Toolbox with spare parts. Custom heater power supply w/Omega controller built & installed. 7.5 KVA 240 volt insolation transformer installed. Brooks Automation VGC IR SSRK RS2322CG vacuum gauge controller w/tubes & cables. Inficon ceramic retainer & crystal holder. Misc tooling. Misc coating materials. Mask was made and tested for dispersion and was better than 1%. PerkinElmer spectrophotometer LAMBDA 25 UV VIS FIXED REST W/SW V2.8 sold separately.
|
|
941
|
CP Continuous Polisher
|
Optical Lapping
|
72"
|
New
|
Excellent |
|
|
Specifications: 72" x 6" DC Powered Granite Continuous Polishing machine. Three powered stations driven by variable speed DC motors. Movable station rollers. 1/4 HP Motor on Bruiser Station. The Bruiser station has 2 DC motors, one to position the truing plate accurately and the other to drive the bruiser to turn consistently. Welded stainless steel drip pan sloped with 2 drain positions. New components. Pictures included show a previously built machine that has been sold and delivered. Call for further specs. Larger machines such as 76" or 100" and bigger can be built.
|
|
1197
|
Degreaser
|
Baron Blakeslee
|
MSR-120
|
|
Good |
|
|
Specifications: Ultrasonic immersion model, 115V, 1ph, refrigerated 1/2 HP model, 2 inside sumps - 10" x 12" x 10", has liftoff cover, OD 32" x 33" 41" LWH. Refrigerated water separator, manual spray wand/foot pedal switch, 475 lbs. Operating manual.
|
|
1143
|
Degreaser
|
Baron Blakeslee
|
MLR 120
|
unkn
|
Good |
|
|
Specifications: Heated vapor degreaser, ID 21" x 24", 2 bays 12" x 10.5".
|
|
1191
|
Flow Hood
|
|
|
|
Good |
|
|
Specifications: Dimensions 8' 2" long x 2' 11 1/2" wide x 5' 8" tall. Hepas replaced last year. Two available.
|
|
1192
|
Grinder
|
Lapmaster
|
24B
|
|
Very Good |
|
|
Specifications: Refurbished. Completely disassembled, striped & powder coated, Bearing, brushes & gears replaced where needed. Fully rewired. New programmable, solid state, variable speed controllers installed. Anodized aluminum yoke arms, etc. Single Sided Grinding machine. 3 phase 220V 60 Hz. Has 24 inch cast Iron Platen. More specs available upon request.
|
|
1193
|
Grinder
|
Lapmaster
|
24B
|
|
Very Good |
|
|
Specifications: Refurbished. Completely disassembled, striped & powder coated, Bearing, brushes & gears replaced where needed. Fully rewired. New programmable, solid state, variable speed controllers installed. Anodized aluminum yoke arms, etc. Single Sided Grinding machine. 3 phase 220V 60 Hz. Has 24 inch Brass Platen. More specs available upon request.
|
|
1194
|
Grinder
|
Lapmaster
|
24B
|
|
Very Good |
|
|
Specifications: Refurbished. Completely disassembled, striped & powder coated, Bearing, brushes & gears replaced where needed. Fully rewired. New programmable, solid state, variable speed controllers installed. Anodized aluminum yoke arms, etc. Single Sided Grinding machine. 3 phase 220V 60 Hz. Has 16 inch Brass lap inside an aluminum pan. Can be refit with a 24 inch cast iron platen by simply taking off the aluminum pan. More specs available upon request.
|
|
1189
|
Grinder Polisher
|
Strasbaugh
|
R6Y-1
|
|
Excellent |
|
|
Specifications: Pan size 18". Completely rebuilt with new equipment: New 303 Stainless teel shaft, 1/4 HP gear motor 33:1 Ratio 90V DC (Baldor), 1/2 HP spindle motor 90V DC (Lesson), Gear reducer 5:1 Ratio (Lesson), SCR Motor Speed Control (Minarik). Machine has been stripped, sanded, primed and powder coated.
|
|
1140
|
Lapper
|
|
36"
|
unkn
|
Good |
|
|
Specifications: 36" precision lapping machine, Heavy duty, radial groove 36" flex-o-lap 1-1/2" thick. New 3 hp motor.
|
|
1157
|
Lapper Double Sided
|
Speedfam
|
5B-8L
|
1987
|
Excellent |
|
|
Specifications: 15" Double Sided Lapping Machine. Will hold eight 4 3/8" carriers, With a 3 3/8" part circle. Hour meter indicates only 158 hours of use. Includes 5 truing gears. 220/220V, 3PH.
|
|
389
|
Milling Machine
|
LOH
|
UMFS 1000
|
1979
|
Good |
|
|
Specifications: 4 Milling units, Horizontal, Vertical, Universal and Rounding (needs Diamond for Rounding). Max slide movement 1300 mm Max processing length 1000 mm. Machine table 1400 x 290 mm. 230V/3ph.
|
|
1144
|
Polisher
|
SAGA
|
150
|
unkn
|
Good |
|
|
Specifications: 40" capacity, pneumatic down pressure, splash pan. Tilt spindle expandable to larger diameters, 24" lapping tool, 208/3phase. In Good to Very Good condition.
|
|
1142
|
Polisher
|
Strasbaugh
|
6CR-DC
|
unkn
|
Good to Very Good |
|
|
Specifications: 36" Stainless Splash Pan, 32" capacity for this model, 2 speed ranges, pneumatic down pressure, two quill arms, high torque. 208 single phase.
|
|
1141
|
Polisher
|
Udagawa Mildex
|
350
|
unkn
|
Very Good |
|
|
Specifications: 16" capacity, 2 Stations with 2 motors per station. Pneumatics, full splash/slurry pan, 3 phase.
|
|
1156
|
Spectrophotometer
|
Perkin Elmer
|
LAMBDA 25
|
2007
|
Excellent |
|
|
Specifications: UV VIS FIXED RES W/SW V2.8 (Item# L6000BB), Variable angle reflectance accessory (Item# B0137314), Relative specular reflectance accessory -6D (Item# B0086703), Solid Sample holder (Item# B0080822). Used for apx one month.
|
|
1188
|
Surface Grinder
|
Chevalier
|
FSG-818AD
|
1989
|
Very Good |
|
|
Specifications: 8" x 18" Table, Precision Surface Grinder with Programmable (microprocessor) Automatic Incremental Downfeed. Integrated coolant tank and pump system. Danetsu Electromagnetic table. Over Wheel Dresser. Full specs on request.
|
|
1180
|
Temescal Ebeam power supply , controller and sweep
|
Airco Temescal
|
CV-8
|
1990's
|
Excellent |
|
|
Specifications: Controller and Power Supply Unit: S/N 8-31974 P/N 0605-7640-0 M/N CV-8-111A Year 1983 (Latest Revision). CV-8 came off a working system.
|
|
1145
|
Temperature Humidity Chamber
|
Thermotron
|
SM-8C
|
Unkn
|
Good |
|
|
Specifications: Temp Range -110F to + 350F (-73.3C to +177C), Humidity Range 20% to 95%. 24"x24"x24", Watlow F4 and 94 series controllers, Chart Recorder.
|
|
1200
|
Window
|
|
|
|
Excellent |
|
|
Specifications: Fused Quartz, 11.5" diameter x 1.75" thick. Flat to 20th wave on one side.
|
|
